M S HUDA

L T DRZAL

D RAY

University of Calcutta (informally known as Calcutta University or CU) is a collegiate public state university located in Kolkata, West Bengal, India.&nbsp;Within India it is recognized as a &quot;Five-Star University&quot; and accredited &quot;A&quot; Grade by National Assessment and Accreditation Council.

&nbsp;

The University of Calcutta has secured the Fifth position among the Universities of India in the prestigious &quot;Indian University Ranking 2019&quot; list, released by the NIRF of the Ministry of Human Resource Development, Government of India.

&nbsp;

It was established on 24 January 1857, and was one of the first institutions in Asia to be established as a multidisciplinary and Western-style university. Its alumni and faculty include several heads of state, heads of government, social reformers, prominent artists, only academy award winner and Dirac medal winner in India, many Fellows of the Royal Society and five Nobel laureates as of 2019 which is highest in South Asia.

University Of Calcutta

Natural-fiber composites in the automotive sector

Properties and Performance of Natural-Fibre Composites

Short jute fiber-reinforced polypropylene (PP) composites were prepared using a high-speed thermokinetic mixer. A compatibilizer was used to improve the molecular interaction between jute and PP. Both the percent weight fraction of the jute fiber and compatibilizer were varied to study the dynamic mechanical thermal (DMT) properties. Dynamic parameters such as storage flexural modulus (E′), loss flexural modulus (E″), storage shear modulus (G′), loss shear modulus (G″), and loss factor or damping efficiency (tan δ) were determined in a resonant frequency mode. The transition peak nature, amplitude, and temperature of E′, E″, G′, G″, and tan δ of different compositions were shown to indicate possible improvements of molecular interaction in the presence of a compatibilizer. The modulus retention term, a plot of the reduced modulus with the weight fraction of the jute fiber, also indicate its improvement. © 1999 John Wiley & Sons, Inc.

Journal of Applied Polymer Science

Short Jute Fiber-Reinforced Polypropylene Composites: Dynamic Mechanical Study

Jute fibers were chopped to approximately 100 mm in length and then processed through a granulator having an 8-mm screen. Final fiber lengths were up to 10 mm maximum. These fibers along with polypropylene granules and a compatibilizer were mixed in a K-mixer at a fixed rpm. 5500, and dumped at a fixed temperature, 390°F, following single-stage procedure. The fiber loadings were 30, 40, 50, and 60 wt %, and at each fiber loading, compatibilizer doses were 0, 1, 2, 3 and 4 wt %. The K-mix samples were pressed and granulated. Finally, ASTM test specimens were molded using a Cincinnati injection molding machine. At 60% by weight of fiber loading, the use of the compatibilizer improved the flexural strength as high as 100%, tensile strength to 120%, and impact strength (unnotched) by 175%. Remarkable improvements were attained even with 1% compatibilizer only. Interface studies were earned out by SEM to investigate the fiber surface morphology, fiber pull-out, and fiber-polymer interface. © 1996 John Wiley & Sons, Inc.

Journal	Data powered by TypesetProperties and Performance of Natural-Fibre Composites
Publisher	Data powered by TypesetElsevier Inc.